Skip to content

Tips to reduce air leakage and cut down your energy bills

September 27, 2012

Many Texas electricity customers struggle with their rising utility bills but most often forget that reducing air leakage can be an important step in controlling their electric bills. If you too are looking for ways to cutyour electric bills, it’s time to considerproper sealing and insulating techniques, which can help you save up to 20% on your overall cooling and heating costs. Here are some simple tips, which if followed, can help you in your endeavor:

  • Sealing your windows: Instead of depending on air leakage for ventilation, you should seal your windows and use controlled ventilation. While you can get a seasonal fix with rope caulk, or opt for window panels to shut out a quick storm, a more permanent solution would need either foam or sealant.
  • Sealing your doors: Though you should get in the habit of closing your doors immediately after you exit or enter to stop air leaking through the your doors, you may also screw on door sweeps or apply caulk/self-adhesive weatherstrip for a more permanent solution.
  • Sealing your ducts: Your heating and cooling system’s efficiency can be improved a lot by sealing old ducts. Depending on where the leak is located, you can either use a putty knife/caulk gun to apply mastic sealant or use a long-lasting tape to close the leak.
  • Check for dirty spots on your carpet and ceiling paint: As such spots may indicate air leaks at wall/floor joists and ceiling joints/interior walls, check them and caulk the joints if you spot leaks.
  • Check for dirty spots in your insulation: Such spots are often a sign of holes, from where air leaks out of and into your house. So, once you spot the leaks, make sure to seal them with low-expansion spray foam.
  • Seal your electrical outlets: Switches and outlets can also act as sources of air leakage, which is why you should install covers and gaskets to save money on your electricity bills. What’s more, they will also help in moisture control.
  • For fireplace that’s not in use: Ensure that the flue damper is tightly closed.
  • Tips for your chimney: As a chimney is designed particularly for smoke to escape, warm air will escape round the clock until you close it. In case your chimney is old, check the chimney damper and replace it if it’s broken or deformed. An easy-to-install solution is a chimney balloon, which would stop the air leakage, in addition to keeping out the odor and debris.

So, save on your energy bills by using these tips. Visit Shop Texas Electricity to compare various electric providers side by side at one place

Comments are closed.

Follow

Get every new post delivered to your Inbox

Join other followers: